Accessories; Troubleshooting And Handling - Pyle PPBCM10 User Manual

IV Accessories
 Body Cam
 Keychain Wireless Remote Control
 USB Wall Adapter & Charging Cable
 (2) Mounting Clips
V Troubleshooting and handling
△
! Device will not boot or respond
1. Please connect the charger to equipment and charge it for at least 2 hours, then check it again.
2. Please check to see if the charger and/or the connecting line is normal.
3. Please press the reset key to restore the device to factory settings, and then check to see if the
problem is still occurring
4. If this does not resolve the problem, please contact customer service staff to return it to the
factory for repair.
△
! Device fails to connect computer, and does not enter upload mode
Please contact customer service staff to resolve this problem.
△
! Red equipment image
The device uses relay control for the infrared filter lens. When it has been hit in the course
of transportation or if it falls, this could lead to the infrared filter lens becoming stuck. The
magnetic force cannot be reset after the relay is energized. At this time, please repeatedly press
the infrared switch. If this does not work, please shut the device down and lightly tap the device
on a soft surface to loosen the magnetic force (then power it back on). If this does not work,
please contact customer service staff to return it to the factory for repair.
12