Franklin IC-142 User Manual page 65

Connecting the Cable to your Digital Book
System (DBS)
When connecting the IntelliLink cable, make sure the
plug is oriented with the wider metal edge on top and
the narrower metal edge on the bottom, as shown
below.
If the cable is not plugged in properly, when you
attempt to transfer data, your PC will display the
message Unable to connect to handheld device . To
correct the problem, remove the plug and reinsert it
the correct way. Then close IntelliLink, reopen it and
start the Import/Export operation again.
Closing IntelliLink Between Operations
IntelliLink can complete only one data transfer
operation per session. To make an additional transfer,
you must close and then reopen the IntelliLink
program. (Minimizing the IntelliLink icon on your
Windows desktop is not sufficient; the program must
be completely closed.)
Important Update
Top
=
Bottom
-1-