Page 4
If device is damaged disconnect it from power supply! Send it to the manufacturer for inspection. Warning! Connect to earth before attaching power supply! Page: Company: Device: Document: Code: Date: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
All settings on the device can be made from outside by a DIL switch. It is not necessary to open the housing. Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Page 6
CMU 100 - RS485 to Singlemode Fiber Optic Converter Picture 1: CMU 100 system general diagram Page: Company: Device: Document: Code: Date: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Hardware settings For proper functioning of that board some settings must be done: Page: Company: Device: Document: Code: Date: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Page 9
Switches at the upper side of connector: BAUD rate bit/s Switch Interface 5 Interface M Interface L 19200 4800 38400 9600 57600 19200 1200 Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Radiation emitted by single mode laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Picture 7: Singlemode fiber optic interface board appearance Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Protective earthing wire must be terminated with tinned copper ear terminal. The prescribed bending radius of the optical fibre cables must be observed. Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
If single mode fiber optic interface is used, do not look into the laser beam. MAINTENANCE The device is maintenance-free. Disconnect power supply before cleaning it. Use moist cloth. Do not use liquids. Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
1200 m Isolation 1000 V DC Connector type „MSTB“ Phoenix 3pin Termination 120 Ohm Max number of devices on RS485 bus Page: Company: Device: Document: Code: Date: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Page 17
Humidity operating up to 95 % (noncondensing) Material Enclosure standard DIN 35 rail (acc. to DIN EN 50022) Mount type Class Overvoltage category Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
- power supply cable with „schuko“ plug, 2 m - RS232 cable to PC (state the lenght up to 15 m) - fiber optic cables (state the lenght) Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Page 20
CMU 100 / 2.1.1.S - 12 20 km, 19200-115200 bit/s, high voltage power FO SM RS232 RS485 CMU 100 / 2.1.5.S - 12 supply Page: Company: Device: Document: Code: Date: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Page 21
CMU 100 / 2.6.6.6.6.6 - 12 5 x FO MM Multimode fiber optic to 5 x multimode FO CMU 100 / 2.6.6.6.6.6.6 - 12 Company: Device: Document: Code: Date: Page: Ediseja 21 CMU 100 / 1.5.S - 0 User manual CMUMU15S 01.09.2019...
Need help?
Do you have a question about the CMU 100 Series and is the answer not in the manual?
Questions and answers