Table of Contents
Advertisement
Digital Book System
Installing & Removing Digital Books
To install a digital book, first turn off your Digital
Book System. Then align the digital book's tabs with
the notches in either book slot on the back and snap
the book into the slot. If you install only one book, it
doesn't matter which slot you use. But make sure
that the book's metal contacts are facing down.
To remove a book, first turn off the Digital Book
System. Then compress the book's tab and lift the
book from the slot.
Restarting the Digital Book System
If the keyboard fails to respond or the screen
performs erratically, first press
press
ON/OFF
and press
the recessed reset button on the back of your Digital
Book System using a paper clip.
If you install or remove digital books
when the Digital Book System is on, or
when you reset the Digital Book System,
you may erase information that you entered in
the installed digital books.
. If nothing happens, hold
. If nothing happens still, press
ON/OFF
CLEAR
and then
CLEAR
27
Advertisement
Table of Contents
