Replacing The Batteries - Franklin IC-104 User Manual

Replacing the Batteries

Your unit uses CR2032 lithium batteries. Before
replacing them, have four new batteries ready.
1. Turn your Digital Book System off.
2. Remove the battery cover on the back. Then
remove all batteries.
3. Promptly slide two new batteries into the
battery cavity with the metal clip over it.
Don't bend the clip; it's an electrical contact. And
make sure the batteries' plus (+) signs face up.
4. Slide two new batteries into the other cavity.
Then replace the battery cover.
WARNING To prevent erasing information
from installed digital books:
• Always replace the batteries before they
completely lose power, and never remove
batteries while the unit is on.
• Never mix old and new batteries. And, once
batteries have been removed, install new
ones within two minutes.
Digital Book System
25