Digital Book System - Franklin IC-104 User Manual

Digital Book System

Installing Digital Books
NOTE: Your Digital Book System will operate only
when one or two digital books are installed.
1. Turn the Digital Book System off.
2. Align the digital book's tabs with the
notches in either book slot on the back of
the Digital Book System.
If you install only one digital book, it doesn't matter
which slot you use. But make sure that the digital
book's metal contacts are facing down.
3. Gently snap the digital book into the slot.
Removing Digital Books
1. Turn the Digital Book System off.
WARNING If you install or remove digital
books while the Digital Book System is on,
you may erase information that you entered
in them.
2. Compress the digital book's tab and lift it
from the slot.
22