Advertisement
Available languages
Available languages
12
C Facial cleansing brush
The facial cleansing brush is waterre-
sistant and can be used in the shower.
Warning
Avoid direct contact with eyes and hair-
line. If skin irritation or redness occurs,
discontinue use.
Batteries may leak if empty or not used
for a long time. Remove exhausted bat-
teries in a timely manner and avoid skin
contact while handling leaking batteries.
Dispose of batteries safely.
Non rechargeable batteries are not to be
recharged. The terminals must not be
short-circuited. Rechargeable batteries
are to be removed from the appliance
before being charged.
Do not mix old and new or different type
batteries.
Description
1
Replaceable brush head
2
On/off switch
3
2-speed control switch
4
Battery compartment
Inserting batteries
Pull firmly to remove the battery com-
partment (A). Insert two AA alkaline
batteries (1.5 V). Observe correct polarity
by aligning +/– symbols (B). Replace the
battery compartment.
How to use the facial cleansing brush
• Click the brush head (1) onto the con-
nection pin until it locks into position.
• Moisten facial skin and brush head lightly
with water. For best results, you may
dispense an exfoliating cleanser in your
hand and massage it over your face.
• Press the on/off switch (2) to turn on
the brush. You can change speeds by
pressing the 2-speed control switch (3).
• Gently brush your face with circular
movements for approximately one min-
ute. Avoid the eye area and hairline.
After use, turn off the brush.
• Rinse face with water. You may wish to
apply a moisturizer. Rinse the brush with
Advertisement
