Installation Notes; Mounting On A Wall - Hisense 32B4E30T User Manual

1.3.

Installation Notes

• Only use the power cable provided with this product. If an extension cord is
required, please consult your service agent.
• The product should be installed on a flat surface, or the product may tip over.
Leave a space between the rear of the product and the wall for proper ventilation.
Do not install the product in a kitchen, bathroom or a place exposed to moisture,
failure to do so may shorten the life of the internal parts.
• Do not install the product where it is 3000m or higher in altitude. Failure to do so
may result in malfunctions.
1.4.

Mounting on a Wall

To mount this display onto a wall, you will have to obtain a standard wall-mounting kit
(commercially available). We recommend using a mounting interface that complies
with TUV-GS and/or UL1678 standard in North America.
VESA Grid
NOTE:
The appearance and color of the product are subject to the material object. The
picture is for reference only.
1. Lay a protective sheet on a table, which was wrapped around the display when it
was packaged, beneath the screen surface so as not to scratch the screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling
mount, table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow
correct mounting procedures could result in damage to the equipment or injury to
the user or installer. Product warranty does not cover damage caused by improper
installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer
than the thickness of the mounting bracket) and tighten them securely.
Unpacking and Installation
Table
Protective Sheet
2