Download Print this page

Chatsworth Products Cube-iT FILTER KIT Installation Instructions

Wall-mount cabinet

Download this manual

IIS-712805, 1 OF 2 - INSTALLATION INSTRUCTIONS, FILTER KIT, CUBE IT - 1:12 - 05/08/2015 - ISS. 3 - CPI/D. ALANIZ

M4 X 25 LONG

PAN HEAD SCREW

4 PLACES

FILTER KIT

(p/n 12805-X01)

FAN KIT (REF)

(p/n 12804-701)

NOTE: REAR PANEL AND RAIL NOT SHOWN

FOR CLARITY

FIGURE 1

TOOL REQUIRED: #2 PHILLPS SCREWDRIVER

INSTALLATION OUTSIDE OF CABINET: (RECOMMENDED)

STEP 1. SET ASIDE FILTER PRIOR TO ASSEMLBY.

STEP 2. ASSEMBLE FOUR PAN HEAD SCREWS PROVIDED FOR THE

FILTER KIT AS SHOWN IN FIGURE 1.

STEP 3. INSTALL FILTER AS SHOWN IN DETAIL B.

FILTER PROPERLY INSTALLED

WHEN FURTHEST FROM THE FAN

**IMPORTANT**

THIS SURFACE TOWARD FAN

PLENUM AREA

DETAIL B

INSTALLATION

INSTRUCTIONS, FILTER KIT,

CUBE IT

THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO

CHATSWORTH PRODUCTS, INC. ANY REPRODUCTION DISCLOSURE

OR USE OF THIS DRAWING IS EXPRESSLY FORBIDDEN EXCEPT

AS AGREED TO IN WRITING BY CHATSWORTH PRODUCTS, INC.

Page 1 CUBE IT NOTE: REAR PANEL AND RAIL NOT SHOWN FOR CLARITY THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO CHATSWORTH PRODUCTS, INC. ANY REPRODUCTION DISCLOSURE OR USE OF THIS DRAWING IS EXPRESSLY FORBIDDEN EXCEPT AS AGREED TO IN WRITING BY CHATSWORTH PRODUCTS, INC.
Page 2 IIS-712805, 2 OF 2 - INSTALLATION INSTRUCTIONS, FILTER KIT, CUBE IT - 1:4 - 05/08/2015 - ISS. 3 - CPI/D. ALANIZ ** INSTALLATION INSIDE OF CABINET: STEP 1. SET ASIDE FILTER PRIOR TO ASSEMLBY STEP 2. ASSEMBLE ONE PAN HEAD SCREW (M4x10 LONG) FROM THE FAN KIT TO AID IN ASSEMBLY OF THE FILTER AND FAN KIT AS SHOWN IN DETAIL C.