Subscribe to Our Youtube Channel
Related Manuals for Williams-Sonoma Hide Mirror Zebra Floor
Summary of Contents for Williams-Sonoma Hide Mirror Zebra Floor
- Page 1 HIDE MIRROR ZEBRA FLOOR ASSEMBLY INSTRUCTIONS Date: 2014-Sept.-16 Rev.: Customer Service 877.812.6235www.williams-sonoma.com Page 1 /5...
- Page 2 Important Safety Instructions: Please read all instructions carefully before assembling this Hide Mirror Zebra Floor. For your safety, assembly by two or more adults is strongly recommended. Keep these instructions for future use. Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the structural integrity of the item.
- Page 3 Assembly Instruction Steps: Attention: For safe mounting of the mirror, it is important to use the proper hardware for your wall type. The hardware included here is meant for dry wall mounting only. If your walls are made from concrete, brick or plaster, please consult your local hardware store for assistance in selecting the appropriate hardware.
- Page 4 4. Position the Hanging Bracket (D) against the wall and make sure that the holes are aligned with the installed ITW Toggles (C). Insert the Toggle Screws (B) using the Philips Head Screw Driver through the holes of the Hanging Bracket (D) by rotating clockwise to tighten. Continue until the 6 installed ITW Toggles are filled.
- Page 5 Make sure to reconnect the strap once the furniture item is returned to its previous position. W A LL Figure 1 Figure 2 8. Assembly is complete Customer Service 877.812.6235 www.williams-sonoma.com Page 5 /5...
Need help?
Do you have a question about the Hide Mirror Zebra Floor and is the answer not in the manual?
Questions and answers