HP ProOne 600 G5 Disassembly Instructions page 5

Release 2 Phillips screws then remove CCD bracket.
Unplug the webcam cable.
Remove webcam housing cover by hands
Release 4 Phillips screws then take out the pop up
Release 6 Phillips #1 screws then remove middle frame
webcam structure.
cover
Remove 6 Phillips #1 screws can make the LCD and panel
Release 4 Phillips #1 screws then remove basepan
frame to be separated.
bracket. You will see LVDS and back light cable.
EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01