Sony ICD-LX30 Quick Start Manual page 2

Searching the recorded files
1
Press SEARCH.
The date selection screen appears.
The recorded date box
2
Press or to select the date when you
recorded the desired file, then press .
3
Press or to select a file.
Press to select a more recent file.
Press to select an earlier file.
Playing back the searched file
1
Press to start playing back.
The selected file starts playing back.
2
Press VOL +/– to adjust the volume.
3
Press to stop the playback.
The selected file stops.
Erasing the searched file
1
Press ERASE.
"Erase?" appears and the specified file is played back for confirmation.
2
Press or to select "YES. "
3
Press .
The "Erasing... " animation appears in the display window and the selected file
will be erased.
 Hint
When a file is erased, the remaining files will advance so that there will be no space between
files.
Owner's Record
The model number is located at the rear panel and the serial number is located inside
the battery compartment. Record these numbers in the space provided below. Refer
to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. _______________________________________
Serial No. ________________________________________
Capacity of the supplied SD memory card with the memory card recorder (User
available capacity)
2 GB (approx. 1.80 GB = 1,932,734,976 Byte)
A part of the memory capacity is used as a management area.
The following FCC statement applies only to the version of this model manufactured
for sale in the USA. Other versions may not comply with FCC technical regulations.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.