Related Manuals for Zero Z06
Summary of Contents for Zero Z06
- Page 1 Z06 - SWING GATE HOME AUTOMATION zero Z06 - SWING GATE MOTOR HOME AUTOMATION SUPPLY 230-24V IT | EN | FR Z06.REV01.2018 USER MANUAL AND CONFIGURATION...
- Page 2 Z06 - SWING GATE HOME AUTOMATION zero HOME AUTOMATION...
- Page 3 •ZERO SRLS. is not responsible for the improper use of the product, or other use than that for which it was designed.
- Page 4 280W Current 1,4 A Capacitor 12.5µF 1400 1800 Maximum gate weight/leaf 500 kg Torque 250 Nm Operating temperatures -25°C to 65°C Thermal protection 120°C Protection class IP67 Working frequence INTENSIVE Opening time 16 seconds DIMENSIONS Z06 dimensions are the following:...
-
Page 5: Installation
Z06 - SWING GATE HOME AUTOMATION 03. INSTALLATION INSTALLATION STEPS GATE LEAF OPENING ANGLE: Establish the required opening angle. 1. Dig a hole big enough to hold the box contai- 2. Insert the tube for water drainage in the ning the operator (C1). - Page 6 Z06 - SWING GATE HOME AUTOMATION 1. Insert the motor into the foundation case 2. Insert the ball in the pin located on the box and fixit with nuts and washers supplied. and fit the gate anchorage lever (L1).
-
Page 7: Maintenance
Z06 - SWING GATE HOME AUTOMATION LIMIT SWITCHES ASSEMBLY (OPTIONAL) Insert, regulate and block the mechanical limit switches in the desired position. OPENING CLOSING It is important to use mechanical stoppers in the opening and closing position of the gate. If not respected, components of the automation may suffer efforts for which they were not prepared, and as a result will be damaged. -
Page 8: Troubleshooting
Z06 - SWING GATE HOME AUTOMATION 05. TROUBLESHOOTING Problem Procedure Behavior Procedure II Make sure you have 230V Door doesn’t power supply connected Consult a qualified ZERO work Still not working. to control board and if it technician. is working properly. - Page 9 All ZERO control boards have LEDs that indicate the functioning of connections to allow easy diagnosis of faults. All safety devices LEDs (DS) in normal situations remain On. All “START” circuits LEDs in normal situations remain Off.
- Page 10 Z06 - SWING GATE HOME AUTOMATION NOTE: _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ PG10...
- Page 11 Z06 - SWING GATE HOME AUTOMATION zero HOME AUTOMATION PG11...
-
Page 12: Home Automation
Z06 - SWING GATE HOME AUTOMATION zero HOME AUTOMATION ZERO SRLS Via ROMA 25/A ALTAVILLA VIC. ITALIA info@miozero.it - www.miozero.it PG12...
Need help?
Do you have a question about the Z06 and is the answer not in the manual?
Questions and answers