Related Manuals for Zero Z03 Series
Summary of Contents for Zero Z03 Series
- Page 1 Z03 - SWING GATE HOME AUTOMATION zero Z03 - SWING GATE MOTOR HOME AUTOMATION SUPPLY 230-24V IT | EN | FR Z03.REV01.2018 USER MANUAL AND CONFIGURATION...
- Page 2 Z03 - SWING GATE HOME AUTOMATION zero HOME AUTOMATION...
- Page 3 •ZERO SRLS. is not responsible for the improper use of the product, or other use than that for which it was designed.
- Page 4 Z03 - SWING GATE HOME AUTOMATION 02. OPERATOR TECHNICAL SPECIFIATIONS Z02 specifications are as follow: Z02.24 Power Supply 230Vac 50/60Hz 24Vdc Power 300W Current 1,4 A Capacitor 12,5µF 1400 1650 Noise level LpA <= 50 dB (A) Force 2800 N Operating temperatures -25°C to 65°C...
-
Page 5: Installation Dimensions
Z03 - SWING GATE HOME AUTOMATION 03. INSTALLATION INSTALLATION DIMENSIONS Z03 specifications are as follow: The operator Z03 must be installed with a small inclination , to prevent water infiltration through the extension arm. For this, the front support must be fixed to the gate with a height lower than the height of the rear support. - Page 6 Z03 - SWING GATE HOME AUTOMATION On the Illustrated diagrams below and are the dimensions for the installation of the automated system. Legend: Dimension X - Horizontal distance between hinge axis of the door and the rear axle of the motor.
- Page 7 Z03 - SWING GATE HOME AUTOMATION During the installation process, it is required to respect the dimensions that are within the hi- ghlighted area: (ex: y=190; x=180) Legend: Dimension X - Horizontal distance between hinge axis of the door and the rear axle of the motor.
- Page 8 Z03 - SWING GATE HOME AUTOMATION INSTALLATION STEPS 01. Fix the supports. 02. Install the operator on the supports The rear support must be fixed on the pillar The operator must be placed on both sup- or wall. The front support must be fixed on ports the same time to avoid leaving the the gate.
- Page 9 Z03 - SWING GATE HOME AUTOMATION MOTOR WIRE CONNECTIONS 01. Connect the 3 automation wires in the terminal. 02. Connect the two automation white wires with the capacitator wires. 03. Connect the power supply wires in the opening the motor will rotate one way and during the closing, the motor will rotate the opposite way.
-
Page 10: Maintenance
Z03 - SWING GATE HOME AUTOMATION 04. MAINTENANCE Make sure that supports remain well fixed Lubricate pins. Place a small amount of lu- on the pillars and gate to ensure proper bricant on the holes that contains support functioning of the equipment. - Page 11 Z03 - SWING GATE HOME AUTOMATION PG11...
-
Page 12: Troubleshooting
Problem Procedure Behavior Procedure II Make sure you have 230V Door doesn’t power supply connected Consult a qualified ZERO work Still not working. to control board and if it technician. is working properly. Consult an experienced Encountered problems? gate expert. - Page 13 All ZERO control boards have LEDs that indicate the functioning of connections to allow easy diagnosis of faults. All safety devices LEDs (DS) in normal situations remain On. All “START” circuits LEDs in normal situations remain Off.
- Page 14 Z03 - SWING GATE HOME AUTOMATION NOTE: _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ PG14...
- Page 15 Z03 - SWING GATE HOME AUTOMATION zero HOME AUTOMATION PG15...
-
Page 16: Home Automation
Z03 - SWING GATE HOME AUTOMATION zero HOME AUTOMATION ZERO SRLS Via ROMA 25/A ALTAVILLA VIC. ITALIA info@miozero.it - www.miozero.it PG16...