Page 1
S8 AutoScore™ II System Clinical Quick Setup Guide Setup is quick and easy … Just Go! The following settings have been pre-set to accommodate typical patient treatment values. S8 AutoScore II Start CPAP: 6 cm H Tube Length: CPAP: 10 cm H...
Page 2
Accessing the clinical menu • Turn on the device and wait until the standby (RAMP) screen appears on the LCD. At this stage you can adjust the ramp time. • Press simultaneously for three seconds to access the clinical menu. Accessing the quickview menu •...
Page 3
S8 AutoScore II clinical menus RAMP: 10 min � menu CLINICAL MENU WELCOME CLINICAL menu exit Settings Menu: SETTINGS � screens enter exit RESULTS � enter exit Options Menu: OPTIONS � screens enter exit SERVICING � enter exit RUN HRS: 8888 �...
Page 5
S8 AutoScore II clinical menus Options Menu: screens OPTIONS � enter exit SMART DATA � enter exit REMINDERS MASK FIT: ON � � enter exit change exit FACTORY DEFAULTS MASK: 16Feb2007 PRESSURE: ON � � � reset change change exit...
Page 6
S8 AutoScore II quickview menu REVIEW SETTINGS enter exit enter exit � MODE: CPAP exit � START CPAP: 4.0 exit � CPAP: 10.0 exit � MAX RAMP: 30 exit � MASK: ULTRA exit � TUBE LENGTH: 2m exit � HUMID: NONE exit �...
Page 7
S8 AutoScore II patient menus Detailed menus WELCOME >>>>>> RAMP: 10min menu CPAP SETTINGS enter exit change exit MASK: ULTRA change exit TUBE LENGTH: 2m change exit change exit SMARTSTART: ON change exit LEAK ALERT: OFF change exit enter exit...
Page 8
Danielson Street Poway CA 92064-6857 USA • ResMed (UK) Ltd (EU Authorised Representative) 96 Milton Park Abingdon Oxfordshire OX14 4RY UK • ResMed Offices Australia, Austria, Belgium, Brazil, China, Finland, France, Germany, Greece, Hong Kong, India, Ireland, Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Norway, Portugal, Singapore, South Africa, Spain, Sweden, Switzerland, UK, USA (see www.resmed.com for contact details).