3. Product Description
3.1 Front View
① LED Indicator
⁻ Power ON mode: BLUE
⁻ Power OFF(Standby) mode: RED
• Be sure to point the remote control at the remote control sensor on the LED/LCD
② USB for OPS, Front or Rear
Display.
③ Touch USB: USB Port is available when Source External is selected.
④ HDMI Input (When connected, it changes to Source External.)
Important Notice
The USB cable (3 m) that Hitachi provides in this accessory box is for use of connection
to Touch USB at the back. Therefore, in case of connecting USB cable to Touch USB in
front, separate USB cable is required and the length of cable is strongly recommended to
be less than 3 m to make sure signal intensity of touch sensor work properly.
①
② ③ ④
11