Table of Contents
Advertisement
Confidential
User Guide
2.
Getting started
Take out all components from the package.
1. PHS-4 Headset
2. Charger
3. User guide
4. Quick reference (optional)
3.
Charging the battery
Before using PHS-4, you must charge the product for approximately 2 hours. When
the battery is fully charged, it provides up to 7 hours of talk time and up to 200 hours
of standby time.
1. Connect the charger cable to PHS-4
2. Plug the AC adapter into a wall outlet. When PHS-4 is charging, red indicator light
will display.
3. When the battery is fully charged, the Red light is off. Unplug the charger cable
from the wall outlet and PHS-4.
4. Pairing the Bluetooth headset with a compatible phone
Pairing is the process of linking the headset with your Bluetooth enabled mobile
phone. After this process is completed, you can use the PHS-4 only with this paired
mobile phone. If you want to use PHS-4 with another mobile phone, you must repeat
the pairing process again. The PHS-4 can be paired with up to 8 compatible phones
but connected to only one phone at a time.
1. Make sure that the compatible phone is turned on and within 10 meters of the
headset.
2. Turn on PHS-4 and make sure the headset is charged. Press and hold volume up
key and volume down key together for about 2 seconds. The blue and red LEDs will
flash alternatively. Release both buttons and the headset is now in pairing mode.
3. Activate the Bluetooth connection from the phone. You may need to consult with
user guide of your phone regarding how to do that.
4. Set the phone to start searching for Bluetooth devices as instructed in user guide
of your phone.
5. Select the PHS-4 from the list.
6. Enter the pin code 0000 to connect (or "pair") PHS-4 to the phone.
Primax Electronics Ltd.
6
Advertisement
Table of Contents
