Primax PHS-4 User Manual page 5

Confidential
• Reject incoming call
1.2 Indicator Light (2):
• Power on –Blue light constant on for 1 seconds and beep once.
• Pairing state –Blue/Red light flashing alternatively, the flashing
continues for approximately 3 minutes or until the headset is
connected to a compatible phone. If the headset can't be
connected to the phone during this time, the headset enter
connectable status.
• Connectable –Blue light flashing once every 5 seconds.
• Connection active –Blue light flashing twice every 8 seconds
• Incoming call –Blue light flashing 3 times every 1 second.
• Active call –Blue/Red light flashing alternatively every 5 seconds.
• Power off –Red light constant on for 1 seconds and beep once.
• Low battery – The Led frequence is ten times of the Led current
1.2 Volume up (3): Increase the earpiece volume
1.3 Volume down (4): Decrease the earpiece volume
1.5 Charger connector (5): For headset battery charging
1.6 Earpiece (6): Relay the caller's voice.
Primax Electronics Ltd.
status,and beep on every 20 seconds
User Guide
5