Download Print this page

Triangle Engineering QB2 4223 Installation And Operation Instructions

Heat buster

Download this manual

QB2 4223

OWNER'S RECORD

Please complete for future reference.

Model #

Purchased from

Date Purchased

_______________________

______________________________________

_____________________________________

Triangle engineering

of arkansas, inc.

E-mail: mail@trianglefans.com • Website: www.trianglefans.com

1101 North Redmond Road • Jacksonville, Arkansas 72076

(501) 982-7558 • Fax (501) 982-5691 • 1-800-255-9014

Installation

■

Operation

■

U L

______________

Serial #

U L

Listed

Fan 232N

Need help?

Do you have a question about the QB2 4223 and is the answer not in the manual?

Page 1 Installation ■ Operation ■ Listed Fan 232N ® ® QB2 4223 OWNER'S RECORD Please complete for future reference. _______________________ ______________ Model # Serial # ______________________________________ Purchased from _____________________________________ Date Purchased Triangle engineering of arkansas, inc. E-mail: mail@trianglefans.com • Website: www.trianglefans.com 1101 North Redmond Road •...
Page 2 IMPORTANT READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS FAN. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. DESCRIPTION on the fans power cord. Only round jacketed The QB2 is a high volume portable fan extension cords should be used.
Page 3 TROUBLEShOOTING SYMPTOM POSSIBLE CAUSE(S) CORRECTIvE ACTION Fan does not operate 1. Replace switch 1. Faulty switch 2. Replace motor 2. Defective motor 3. Check to see if power cord 3. No power is plugged in. Check fuse or circuit breaker. Insufficient air flow 1.
Page 4 Triangle Engineering. Once the label is received, and if the motor is still under warranty, we will ship a new motor within 24 hours, UPS PREPAID. DO NOT RETURN MOTOR. Specifications subject to change without notice. © 2002 Triangle Engineering of Arkansas, Inc. Made in U.S.A. 3/06...