Do you have a question about the HEAT BUSTER SPL Series and is the answer not in the manual?
Questions and answers
Richard Bullis
April 24, 2025
I work at a school that has an SPL 4213. The fan buzzes when we flip the switch but the blades won't spin unless we assist them. I called a few days ago and was told to blow the motor out. Tried that but still the same. Any other suggestions?
Related Manuals for Triangle Engineering HEAT BUSTER SPL Series
Summary of Contents for Triangle Engineering HEAT BUSTER SPL Series
Page 1
Please complete for future reference. _______________________ ______________ Model # Serial # ______________________________________ Purchased from _____________________________________ Date Purchased Triangle engineering of arkansas, inc. E-mail: mail@trianglefans.com • Website: www.trianglefans.com 1101 North Redmond Road • Jacksonville, Arkansas 72076 (501) 982-7558 • Fax (501) 982-5691 • 1-800-255-9014...
Page 2
IMPORTANT: READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS FAN. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. DESCRIPTION prong grounded plug furnished on the fans power cord. The HEAT BUSTER is a high volume portable fan Only round jacketed extension cords should be used.
Page 3
TROUBLEShOOTING SYMPTOM POSSIBLE CAUSE(S) CORRECTIvE ACTION Fan does not operate 1. Faulty switch 1. Replace switch 2. Defective motor 2. Replace motor 3. No power 3. Check to see if power cord is plugged in. Check fuse or circuit breaker. Insufficient air flow 1.
Page 4
It is expressly understood that Buyer’s sole and exclusive remedy shall be repair or replacement of defective parts, and that Triangle Engineering shall not be liable for injury to persons or property. Should the goods prove so defec- tive, however, as to preclude the remedying of warranted defects by repair or replacement, the Buyer’s sole and exclusive remedy shall then be a refund of the...
Need help?
Do you have a question about the HEAT BUSTER SPL Series and is the answer not in the manual?
Questions and answers
I work at a school that has an SPL 4213. The fan buzzes when we flip the switch but the blades won't spin unless we assist them. I called a few days ago and was told to blow the motor out. Tried that but still the same. Any other suggestions?