Dodge Grand Caravan 2018 Owner's Manual page 140

138 GETTING TO KNOW YOUR INSTRUMENT PANEL
3. Push and release the down arrow button until the
"Compass Variance" message is displayed in the instru-
ment cluster display, then press the right arrow button.
The last variance zone number displays in the instru-
ment cluster display.
4. Push and release the right arrow button until the proper
variance zone is selected, according to the map.
5. Push and release the RETURN button to exit.
Turn Menu OFF
Select from Main Menu using the up or down arrow
button. Pushing the right arrow button clears the menu
display. Pushing any one of the four Display control
buttons will bring the menu back.
Customer-Programmable Features (System Setup)
Personal Settings allows you to set and recall features
when the transmission is in PARK. If the transmission is
out of PARK or the vehicle begins moving, a warning
message SYSTEM SETUP NOT AVAILABLE VEHICLE
NOT IN PARK displays when you try to select "System
Setup" from the main menu.
Push and release the up or down arrow button until
System Setup is highlighted in the main menu of the
instrument cluster display. Then, push and release the
right arrow button to enter the System Setup sub-menu.
Push and release the up or down arrow button to select a
feature form the following choices.
Language
When in this display you may select one of three languages
for all display screens, including the trip functions and the
navigation system (if equipped). Push and release the up or
down arrow button while in this display and scroll through
the language choices. Push and release the right arrow
button to select English, Spanish (Español), or French
(Français). Then, as you continue, the information will
display in the selected language.
Nav–Turn By Turn
When this feature is selected, the navigation system utilizes
voice commands, guiding you through the drive route mile
by mile, turn-by-turn, until the final destination is reached.
To make your selection, push and release the right arrow
button until a check-mark appears next to the feature
showing the system has been activated, or the check-mark
is removed showing the system has been deactivated.