Advertisement
Available languages
Available languages
BREWING TEA
1. Fill the glass jug with desired amount of
water. Ensure you do not fill past the MAX
mark. Place the outer lid, tea basket, and
inner lid.
2. Select the tea type by pressing the
TEMP/KEEP WARM button. The tea type
determines brew temperature and steep
time, based on medium strength. Press
STEEP TIME to engage to automatic
steeping function.
The tea maker has 5 preset tea types
recommended for optimal brewing of
Green, White, Oolong, Herbal, or Black tea.
TEA TYPE
Green White Oolong Herbal Black
Preset Brew
175°F 185°F 195°F 205°F 212°F
Temp
2
Mild
Steep
Time*
*
3
Medium
(mins)
4
Strong
* Preset steep time is based on medium strength,
but you can adjust depending on your taste.
NOTE
This product is not calibrated for commercial
or scientific use. Temperatures may vary ± 3˚C,
which is within range for optimal brewing for
each tea variety.
3. Start heating by pressing START/CANCEL
button. The tea maker will start heating.
4. Once the selected brew temperature is
reached it will beep 3 times. Open the tea
basket lid by pressing the detachment
button and use a tea spoon (approximately
5g) to fill the basket with tea leaves. As a
general guide, use 1 teaspoon of tea leaves
per cup / 250ml of water, however this will
depend on the instructions on tea
packaging and your personal preference.
Re-place the tea basket lid.
10
2
2
3
1
3
3
4
2
4
4
5
3
WATER TO TEASPOON RATIO
500mL / 16oz
750mL / 24oz
1000mL / 32oz
5. Start steeping by pressing the START TIMER
button. The timer is set based on medium
strength by default, but you can change this by
pressing STEEP TIME button.
NOTE
Temperature and time can be changed
during heating or steeping cycle.
6. Once brewing cycle is complete, the tea maker
will beep 3 times. Lift the inner lid along with
tea basket, and detach the tea basket. Then
close the lid. Your tea is ready now. The tea
maker will keep the tea warm until you are
ready to drink.
NOTE
Keep warm will last for 30 minutes after
the tea is brewed. When the glass jug is
removed from the power base, it will stop
keep warm function.
To restart the Keep Warm function, place the jug
containing Tea or Water on the power base, then
press and hold the TEMP/KEEP WARM button
for 2 secs. The jug will keep warm for another
30mins at the previous brewed temperature.
BOILING WATER
Remove the tea basket and fill the glass jug with
water. Close the jug with the lid. Select the desired
temperature by pressing TEMP/KEEP WARM
button, and then turn off time indicator by pressing
STEEP TIME button. Press START/CANCEL
button to start. When finished, it will beep 3 times.
CHANGING BEEP VOLUME
Press and hold STEEP TIME button and TEMP/
KEEP WARM button together for 2 seconds to
enter volume adjustment mode. Press STEEP
TIME button to choose among OFF (mute), 3
(default), and 5 (louder). To save and exit, press the
two buttons together or wait for 7 seconds.
2 teaspoons
3 teaspoons
4 teaspoons
Advertisement
