Advertisement
Quick Links
Advertisement
Related Manuals for Vision X Duralux
Summary of Contents for Vision X Duralux
- Page 1 Installation Instructions & User’s Manual VISIONXLIGHTING.COM...
-
Page 2: Maintenance
MAINTENANCE 1. All Vision X models have been designed for maintenance free use. In the case an LED lamp or other part replace- ment is needed please contact your authorized service... - Page 3 PART (N1) Qty: 2 WARNINGS As with many other high-tech products, this VISION X LED requires a bit of attention before you can use it. Please read the accompanying information carefully fi rst. 1. Don’t stare directly into the light or shine directly into the eyes of another person as this may cause temporary loss of vision.
- Page 4 5. Drill the hole to the required size for the Switch (S1) and mount to desired position. 6. Reconnect the Switch (S1) to the Harness. 7. Test Light. MANUFACTURER RECOMMENDATION For those unfamiliar with electrical wiring on vehicles, Vision X recommends that all LED Lighting products are professionally installed.
-
Page 5: Wiring Diagram
DURALUX KIT WIRING DIAGRAM: (R1) (R2) (P1) (W4) (S1) (W3) (W2) (W1) (C1) (C2) *To Light *To Light COMPONENTS KEY Part (R1 & R2) Relay Part (W1 & W3) Power Wire for Relay Coil a. 9-32V DC Volt Positive (+) Input Wire Part (W2 &... -
Page 6: Additional Information
VISION X WARNING: Bolts, Nuts, and Washers are Stainless Steel. DO NOT USE Pneumatic or Electric Tools to Tighten and Loosen. The Hardware Will Permanently Lock Together. MOUNTING INSTALLATION INSTALLATION 1. Determine where the light/lights will be placed. 2. Place mounting bracket with light to desired location. Using a marker or pick tool, mark the center point of the bolt hole on the mounting surface. - Page 7 DURALUX KIT (B1) (Mounting Bracket) (W1) (N1) MOUNTING KEY Part (B1) Bolt [M8] (Mounting Bracket) Part (W1) Washer Part (N1) Nut [M8] (B2) ADJUSTMENT KEY Part (B2) 5mm Locking Bolt (Mounting Bracket)
- Page 8 You May Also Be Interested In: SECURITY BOLT Available in multiple sizes Part # - 9900162 Item # - P-DURA4FLUSHMOUNT DURA 4 Flush Mount Bracket SECURITY NUT Available in multiple sizes Part # - 9895499 Item # - DURA-M460 CLAMP TUBE MOUNT 2.75”...