Garmin Vector 2S Quick Start Manual page 2

Introduction
E
Read all instructions carefully before
N
installing and using the Vector™ system.
Improper use could result in serious
injury.
See the Important Safety and Product
Information guide in the product box for
product warnings and other important
information.
Go to www.garmin.com/vectorowner
for the latest information including bike
compatibility, software updates, and video
tutorials.
Tools Needed
Installing Vector Components
Preparing for the Installation
1 Confirm the compatibility of your bike
2 Find the sensor ID that is engraved
3 Remove the existing pedals.
4 Clean the threads, and remove old
2
• 15 mm pedal wrench
• Bike grease
• 3 mm hex key
• 4 mm hex key
at www.garmin.com/vectorowner.
on the spindle, and write it down.
grease.
WARNING
NOTICE