Advertisement
1
Connect power and ethernet cables: Connections are
underneath the register near the back.
2
Install receipt paper: Install the paper by pressing the lid
release button and lifting up on the printer lid. Note the correct
paper orientation from the pictures above.
Ethernet
Mini-USB
Power
3
Power on the register: Press the power button. If an ethernet internet
connection is available, registration will start automatically when the
device powers on.
4
If an internet connection is not found in step 3, hold the power button
down for 3 seconds and release. This lets you enter the set-up page
to find your WiFi connection. Under the Network Tab, select your WiFi
network. Once connected your device should start auto-provisioning itself
to your software provider. Once set up is complete, password 1elo can be
used to re-enter your control panel if needed.
Advertisement
