Page 1
VEHICLE SUPPORT STANDS K12070 Distributed by Kincrome Tools & Equipment www.kincrome.com.au...
Page 2
MAINTENANCE AND STORAGE ................... 5 Cleaning ..........................5 Storage ..........................5 Repairing ..........................5 SPECIFICATIONS Working Load Limit 1350 KG Height Lowered 252 mm Height Raised 370 mm Total Weight: 3.8 KG Base Dimensions: 195mm x 170mm Part Number K12070...
Page 3
IMPORTANT SAFETY INFORMATION The use of vehicle support stands has inherent dangers to avoid risk of personal injury or property damage make sure you are fully aware of the operating instructions for this product, the recommendations in the vehicle owners manual for jacking of your vehicle and the safe usage instruction for the jack you will use; all prior to lifting the vehicle.
Page 4
jack type, and location of jack and vehicle support stands areas on vehicle. The working load limit of these vehicle support stands is 1350 kg. NEVER EXCEED WORKING LOAD LIMIT. 3.) Clear children and others from work area before moving or lifting vehicle. Another adult should be nearby for extra safety and assistance but must be clear of vehicle as it is moved or lifted.
Page 5
8.) SLOWLY lower vehicle down onto vehicle support stands. 9.) Lower jack so as saddle does not bear any weight but do not remove jack from jacking position. Working on Vehicle Any vehicle being supported by a jack or vehicle support stands creates a potentially hazardous working environment.
Page 6
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528). If this product has materials or workmanship defects (other than defects caused by abnormal or non warranted use) you can , at your cost, send the product to place of purchase, an authorized Kincrome service agent or one of Kincrome’s addresses for repair or replacement.
Need help?
Do you have a question about the K12070 and is the answer not in the manual?
Questions and answers