Service Imap - Fortinet FortiGate FortiGate-400 Administration Manual

Antivirus

service imap

FortiGate-400 Administration Guide
Example
This example shows how to add antivirus scanning for POP3 traffic on ports 992 and
993. Adding more ports for scanning does not erase the default, port 110. Use the
unset command to remove all ports from the list.
config antivirus service pop3
set port 992
set port 993
end
This example shows how to display the antivirus POP3 traffic settings.
get antivirus service pop3
This example shows how to display the configuration for antivirus POP3 traffic.
show antivirus service pop3
Use this command to configure how the FortiGate unit handles antivirus scanning of
large files and what ports the FortiGate unit virus scans for IMAP traffic.
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
Command syntax pattern
config antivirus service imap
set <keyword> <variable>
end
config antivirus service imap
unset <keyword>
end
get antivirus service [imap]
show antivirus service [imap]
Table 30: antivirus service imap command keywords and variables
Keywords and variables
port <port_integer>
01-28006-0006-20041105
Description
Configure antivirus scanning on a
nonstandard port number or
multiple port numbers for IMAP.
You can use ports from the range
1-65535. You can add up to 20
ports.
CLI configuration
Default Availability
143 All models.
319