Wolf KG Installation And Maintenance Instructions Manual page 13

Appliances that can
be dismantled
3062049_201610
Installation instructions
The equipment is shipped to site preassembled. It can be disassembled before being
moved into position and reassembled at the final location.
Disassembly entails removing the casing and carefully removing internal components
such as heating or cooling coil (take care not to damage the components). Remove the
screws from the corners of the frame to permit removal of the frame.
KG Top 21 - 380
Immediately before assembling the vertical hollow sections with the floor and ceiling
panels, seal the hollow sections with the sealant supplied. Otherwise the water tightness
of the appliance cannot be guaranteed.
For this it is recommended that some of the sealant is poured into a flat vessel of
adequate size, and then to dip both ends of the vertical hollow section approx. 2 mm
deep into the sealant.
The appliances are assembled in reverse order.
Hollow
profile
Undo
screws
KG Top 450 - 1000
Sealant
KG Top
13