Ccd Sensor; Model G3-1000; Model G3-6300 - Moravian Instruments G3 Mark II Series User Manual

CCD sensor

Quantum efficiency (sensitivity) of CCD detectors used in G3 cameras
depends on the particular camera model.
Figure 6: Quantum efficiency of OnSemi CCD detectors used in G3 cameras
Inherent dark current of these detectors is quite low compared to other
CCD detectors, suitable for scientific applications, which results into very
good signal/noise ratio.

Model G3-1000

G3-1000 model uses 1 MPx CCD OnSemi KAF-1001E.
Resolution
Pixel size
Imaging area
Full well capacity
Output node capacity
Dark current
Dark signal doubling

Model G3-6300

G3-6300 model uses 6 MPx CCD OnSemi KAF-6303E.
Resolution
Pixel size
16
1024 × 1024 pixels
24 × 24 μm
24.6 × 24.6 mm
Approx. 220 000 e
Approx. 650 000 e
17 e-/s/pixel at 0°C
5.5 °C
3072 × 2048 pixels
9 × 9 μm
-
-