NAT/Route mode installation
Preparing to configure the FortiGate unit in NAT/Route mode
FortiGate-400 Installation Guide
FortiGate-400 Installation Guide Version 2.80 MR4
This chapter describes how to install the FortiGate unit in NAT/Route mode. For
information about installing a FortiGate unit in Transparent mode, see
mode installation" on page
units in HA mode, see
about installing the FortiGate unit in NAT/Route mode, see
configuration" on page
This chapter describes:
•
Preparing to configure the FortiGate unit in NAT/Route mode
•
Using the web-based manager
•
Using the front control buttons and LCD
•
Using the command line interface
•
Using the setup wizard
•
Connecting the FortiGate unit to the network(s)
•
Configuring the networks
•
Next steps
Use
Table 5
to gather the information that you need to customize NAT/Route mode
settings.
You can configure the FortiGate unit in several ways:
•
the web-based manager GUI is a complete interface for configuring most settings.
See
"Using the web-based manager" on page
•
the front control buttons and LCD provide access to the most important basic
settings
"Using the front control buttons and LCD" on page
•
the command line interface (CLI) is a complete text-based interface for configuring
all settings. See
"Using the command line interface" on page
•
the setup wizard provides easy, fast configuration of the most basic settings to get
the unit up and running quickly. See
The method that you choose depends on the complexity of the configuration, access
and equipment, and the type of interface you are most comfortable using.
01-28004-0022-20040830
39. For information about installing two or more FortiGate
"High availability installation" on page
20.
"Using the setup wizard" on page
"Transparent
47. For more information
"Planning the FortiGate
26.
28.
29.
31.
25