Table of Contents
Advertisement
Hotel Option menu Item
Network Setup
Network
Apps ID Setting
Apps Setting
Service Discovery
ARP Interval
System Manager
Description
If this item is entered into, Network menu is displayed. The Network menu is used for
setting network like internet access.
• Network Status: View the current network and Internet status.
• Soft AP: Turns on or off the Soft AP. When Soft AP is set to on, your mobile devices
can find the TV name in Wi-Fi connection list.
– When the TV connected with wireless network, Soft AP is enabled.
• Security key: Set a security key that you need to enter on other devices so they can
connect to the TV.
• Open Network Settings: Connect to an available network.
– Input the generated security key into the device you want to connect.
– If network does not operate normally,check the security key again. An incorrect
security key may cause a malfunction.
– Soft AP may not be available if it is not supported by the model.
– Maximum number of devices that can be connected: 4 devices.
– Bitrate: 10 Mbps/device.
– The specifications above are based on our in-house testing. Actual performance
may vary depending on your wired/wireless network environment.
The feature to set specific Hotel ID for installing the app of the correspoding hotel in
the Hotel TV.
Enters Samsung App Store for managing current apps and installing new apps in the
Hotel TV.
Can use this feature to enable the function like DLNA.
Adjust the ARP (Address Resolution Protocol) interval value.
• Setting value: 2 / 5 / 10 / 30 / 60 / 120 / 180 second (default: 60 sec)
Gives you direct and immediate access to System Manager menu such as such as
Time, Language, Change PIN, etc.
System Manager allow you to adjust your TV's system and customise settings for your
viewing environment.
English - 33
Advertisement
Table of Contents
