Dhcp Exclude Range Settings; Ip/Mac Binding - Fortinet FortiGate FortiGate-1000A Administration Manual

IP/MAC binding

DHCP exclude range settings

IP/MAC binding
86
Starting IP
Ending IP
Delete
Edit/View icon
The range cannot exceed 65536 IP addresses.
Figure 32: Exclude range settings
Starting IP
Ending IP
To add an exclusion range
1 Go to System > DHCP > Exclude Range.
2 Select Create New.
3 Add the starting IP and ending IP.
4 Select OK to save the exclusion range.
If you have added DHCP servers, you can use DHCP IP/MAC binding to reserve an
IP address for a particular device on the network according to the MAC address of the
device. When you add the MAC address and an IP address to the IP/MAC binding list,
the DHCP server always assigns this IP address to the MAC address. IP/MAC binding
pairs apply to all FortiGate DHCP servers.
Figure 33: IP/MAC binding list
Create New Select Create New to add a DHCP IP/MAC binding pair.
Name The name for the IP and MAC address pair.
IP Address The IP address for the IP and MAC address pair. The IP address must be
within the configured IP range.
MAC Address The MAC address of the device.
The starting IP of the exclude range.
The ending IP of the exclude range.
Delete an exclude range.
View or modify an exclude range.
Enter the starting IP of an exclude range.
Enter the ending IP of an exclude range.
01-28011-0254-20051115
System DHCP
Fortinet Inc.