Create Arrays - MSI X470 GAMING PLUS User Manual

Create Arrays

Arrays can be created after the disks are initialized.
Important
For redundant arrays, the Create process is not finished until after the operating
y
system and AMD-RAID OS drivers have been installed and the system has booted to
the operating system. However, the arrays are immediately available to use for either a
bootable array or a data array.
If the system is booted from an AMD-RAID bootable array, the first array in the
y
Arrays section must be the bootable array. The system boots only from the first array
in the Arrays section. As necessary, use the Swap Two Arrays feature to swap arrays
and place the bootable array in the first position.
To create an array
1. At the Main Menu, use the arrow keys to highlight Create Array and press Enter.
2. Select the disks with which to create the array by pressing Insert key.
3. Press Enter to include the selected disks in the array.
4. In the User Input section, use the arrow keys to select an array type. Only array
types that can be created with the selected disks are available.
5. Press Enter.
6. Select an array size.
7. Press Enter when either the desired size or the maximum available size is
reached.
8. Select a caching level using the arrow keys and press Enter.
9. Press C to confirm the array settings.
98
RAID Configuration
AMD-RAID Array Configuration
RAID0: Stripe set - distributes space across disks for higher performance
Arrays
Create Array
Disk: 0,2
Type: RAID0
User Input
Select Array Type to Create
RAID5 RAID10N
RAID0 RAID1N
RAID1 Volume
RAID10 RAIDABLE
RAID50
Disks
0-00,640GB,Ready
0-01,640GB,Ready
Available Keys
<↑><↓><→><←>=Choose, <Esc>=Back
Enter=Select Menu Item