Controlling A Tv With The Supplied Remote Control; Setting Up The Remote To Control Your Tv - LG DM8360 Owner's Manual

Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing
1 (TV POWER) Turn the TV on or off.
Switch the TV' s input source
INPUT between the TV and other
input sources.
Scan up or down through
PR/CH W / S
memorized channels.
VOL +/– Adjust the volume of the TV
Mutes the sound.
(TV Mute)
,
Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
Setting up the remote to control
your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
You can
2. Release the 1 (TV POWER) button to complete
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
reset to the default setting. Set the appropriate code
number again.
press the manufacturer code for your TV with the
numerical buttons (see the table below).
Manufacturer
LG
Zenith
GoldStar
Samsung
Sony
Hitachi
setting.
Appendix 41
Code Number
1(Default), 2
3, 4
1, 2
6, 7
8, 9
4
6