Honda NSS250 2007 Owner's Manual page 72

4. Use the helmet holder ( ), located
below the seat, to secure your helmet
with your scooter.
Insert the ignition key into the seat
lock and turn it clockwise to unlock.
Remove the helmet holder cable ( )
from the plastic bag (page
route it through the helmet D-rings
( ). 4
Hook the loops of the holder cable
onto the helmet holder.
Lower the seat to lock.
To remove a helmet, unlock the seat
lock. Remove the hooks of the holder
cable from the helmet holder. Remove
the cable from the helmet D-rings and
return the cable to the plastic bag in the
center compartment.
2
3
86 ) and
(3)
(2) helmet holder
(3) helmet holder cable
(4) D-rings
Basic Operation & Riding
Parking
(2)
(4)
63