Panasonic Lumix DC-G9L Owner's Manual page 81

[Metering Mode]
Applicable modes:
Type of optical measurement to measure brightness can be changed.
> [Rec] > [Metering Mode]
MENU
[ ]
(Multiple)
[ ]
(Center weighted)
[ ]
(Spot)
[High Resolution Mode]
Applicable modes:
This function generates a picture with enhanced resolution from pre-recorded images. It is
effective for still subjects.
• Use a tripod to minimize camera shake.
• If you are using a Panasonic interchangeable lens, its image stabilizer function will be
automatically set to [OFF]. When using a non-Panasonic interchangeable lens provided with an
image stabilizer function that can be turned ON/OFF, set it to OFF.
> [Rec] > [High Resolution Mode]
MENU
1
Press 3/4 to select [Start], and press [MENU/SET].
• The High-Res Mode icon A will flash when shake is
detected. It may not be possible to create pictures with the
impression of high resolution. To avoid this, hold the
camera firmly.
2
Decide on the composition, and perform recording.
• The screen will go dark during recording.
• The recording state indicator (red) B will flash. Do not
move the camera while the indicator is flashing.
• Recording will finish automatically. When the recording has
finished, the camera will combine the pictures, so it will not
be able to perform the next recording for a while.
• You can proceed to the next recording.
3
Press [Fn2] to end High-Res Mode.
This is the method in which the camera measures the most suitable
exposure by judging the allocation of brightness on the whole screen
automatically.
Usually, we recommend using this method.
This is the method used to focus on the subject on the center of the
screen and measure the whole screen evenly.
This is the method to measure the subject in the spot metering target.
• If you set the spot metering target on the edge of the screen, the
metering may be affected by the brightness around the location.
Menu
81
(ENG) DVQX1310