Specifications; Setting Up The Sewing Machine - JUKI DSC-244 Instruction Manual

Model
Type of sewing
machine head
Usage
Sewing speed
Stitch length
Lift of presser foot
Thread take-up lever
Needle bar stroke
Needle to be used
Needle system
Stitch adjusting method
Lubrication method
Motor to be used
Oil to be used
Noise
4
DSC-244
Cylinder-bed, 1-needle, unison-feed lockstitch
machine
Suited for sewing medium-to heavy weight materials
GROZ-BECKERT 135×17 Nm90 to Nm130（Standard Nm110）
By an oiler and an oil wick centralized in face plate
- Equivalent continuous emission sound
pressure level (L ) at the workstation :
pA
A-weighted value of 83.5 dB; (Includes K
2.5 dB); according to ISO 10821- C.6.2 -ISO
11204 GR2 at 2,200 sti/min.
- Sound power level (L ) ;
WA
A-weighted value of 89.5 dB; (Includes K
= 2.5 dB); according to ISO 10821- C.6.2
-ISO 3744 GR2 at 2,200 sti/min.
1
4
2
3
Cylinder-bed, 1-needle, unison-feed lockstitch
machine (horizontal drop feed)
Max. 2,200 sti/min
0 to 6 mm
Hand lifter : 9 mm、Knee lifter : 15 mm
Slide type thread take-up
36 mm
#50 to #20
Dial
400W Electro-stop motor (4P)
New Defrix Oil No.1
- Equivalent continuous emission sound
pressure level (L
= A-weighted value of 80.0 dB; (Includes K
pA
2.5 dB); according to ISO 10821- C.6.2 -ISO
11204 GR2 at 2,200 sti/min.
WA
1. Mounting position of the knee lifter
(Caution) The knee lifter should be mounted before the
moter is installed.
2. Carry the sewing machine with two persons.
(Caution) Do not hold the handwheel.
3. Do not put protruding articles such as the screwdriver and
the like at the location where the sewing machine is placed.
4. Setting the sewing machine
Holding countersunk screw 1 , washer 2 and nut 3 supplied
with the unit, fix the sewing machine on the table with
aligned with rubber packing 4 at four locations.
5. Securely attach head support rod to the table until it goes no
further.
– 1 –
DSC-244V
) at the workstation :
pA
pA
=