8 Channel Systems:
8 Channels, each with a 8 mbps file ("8X8").
Channels 1-8 may be mapped to a single SCSI drive.
MaxDisks = 1.
If two SCSI disks are used:
Channels 1-4 are mapped to drive D:\
Channels 5-8 are mapped to drive E:\
Set MaxDisks = 2.
If two sets of disks are used (total of 4 SCSI drives):
Channels 1-4 are mapped to D:\ & E:\
Channels 5-8 are mapped to F:\ & G:\
The setting MaxDisks remains = 2.
12 Channel Systems:
12 Channels, each with a 8 mbps file ("12X8")
With 2 SCSI hard drives--(Max Disks = 2)
Channels 1-6 are mapped to Drive D:\
Channels 7-12 are mapped to Drive E:\
or
with 3 SCSI hard drives--(MaxDisks = 3)
Each board is mapped to an individual drive
Board 1 to Drive D:\
etc.