Table of Contents
Advertisement
Audio/Video
AudioFreq
0 = AudioFreq, audio frequencies auto detected.
2c = all files are played at 44kHz.
30 = all files are played at 48kHz.
DisableSync
0 = Enables audio/video synchronization.
1 = Disables audio/video synchronization.
DSIZEAUDIO
This parameter sets the size of audio memory allocated on the
board.
0 = Automatic.
FrameShift
This parameter adds an offset to the video frame relative to the
audio track. Positive values are the number of frames to push the
video forward.(e.g. 3 = 3 frame forward). Negative shifts are
represented by the value + 64 (e.g. 67 = 3 frames back).
MaxSyncFix
Sets the maximum audio/video sync correction in units of 90000
decimal per second.
0 = Automatic configure.
2ee0 = NTSC default.
3840 = PAL default.
RampVolume
0 = Normal audio operation.
1 = Eliminates an audio pop that sometimes occurs when switching
between audio sources in the genlock module. If changed to 1,
thorough tests should be done to confirm desired results.
Advertisement
Table of Contents
Troubleshooting
