Photograph; Fiber Optic Transceiver Module (Ae04A-D1100-009); Description - Andrew AE04A-D1248-001 Operation & Maintenance Manual

5.5.3

Photograph

5.6 Fiber Optic Transceiver Module (AE04A-D1100-009)

5.6.1 Description

The Fiber Optic Transceiver Module converts the Downlink and Uplink electrical
(RF) signals into optical signals prior to routing the signals between remote BDAs
and the base transceiver station. The fiber optic transceiver is capable of
providing up to 18 dB of RF gain. So for fiber optic links with 9 dB or less of
optical loss, the fiber transceiver can negate that loss and in turn provide a fiber
link that is lossless. During the BDA setup, the fiber optic link is set to 0 dB.
The fiber optic transceiver module has an on board RISC processor that provides
optional alarming/status monitoring and communications capability. The fiber
transceiver is also equipped with high reliable parts to provide a long trouble-free
operating life. Should the module be suspect of failure, the entire module should
be replaced. Note, due to the possibility of laser radiation hazard, the fiber optic
transceiver module cover should never be removed to troubleshoot or to adjust the
laser optical power.
DWG NO: AE04B-A1669
400/800 MHz Fiber Optic & RF Fed Bi-Directional
Wireless Innovations Group
2601 Telecom Parkway
Richardson, Texas 75082
Rev: B
Amplifier Operations / Maintenance Manual
Date: 06/18/2008 37 of 63
Page: