Table of Contents
Advertisement
Operation
Starting the programme
Start the programme by closing the
door.
The programme will begin.
The In-operation indicator comes on to
show that a programme has been
started.
A programme should only be
cancelled in the first few minutes, if
at all. Otherwise important
programme stages could be omitted.
56
Time display
The estimated duration of the
programme selected appears in hours
and minutes in the display before the
programme begins. If the door is
opened during the programme, the time
left until the end of the programme is
displayed.
Each programme stage is indicated by
a symbol:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
Finish
The programme duration displayed may
vary with the same programme. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process, the water softener,
the type of detergent, the amount of
crockery and how dirty it is.
When a programme is selected for the
first time, the display will show the
average programme duration for a cold
water intake.
The times shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.
Advertisement
Table of Contents
