Advertisement
4.6
Operation procedures
Keep this state more than 2 seconds while
continuing pressing the [SEL] button, [SOURCE]
button and [STANDBY/ON ATTENUATOR]
button sequentially.
The unit enters the service mode.
"INIT ALL" is
indicated on the LCD.
"VERSION" is
indicated on the LCD.
"AREA/RGN" is
indicated on the LCD.
"VIDEO" is
indicated on the LCD.
"CLR ERR" is
indicated on the LCD.
"CD ERROR" is
indicated on the LCD.
A
B
Press the [SEL] key
Press the [SEL] key
Press the [SEL] key
Press the [SEL] key
Press the [SEL] key
Press the [SEL] key
Error code (1 byte)
First byte
[01] Eject error
[02] Loading error
Initialize all data to the factory setting
:The system control EEPROM is
initialized entirely.
Microcomputer version display
S-XXX-YY
System control CPU
version/ROM correction version
DVD-XXXX
DVD version
*Exchanging it operate each indication with the
[DISC UP] button and [DISC DOWN] button.
Destination area/region display
STS-X XX
System control destination
DVD-X XX
DVD unit destination
DVDRGN X
DVD unit region
*Exchanging it operate each indication with the
[DISC UP] button and [DISC DOWN] button.
Setting of NTSC or PAL
"NTSC" or "PAL" are indicated on the LCD.
*Exchanging it operate each indication with the
[DISC UP] button and [DISC DOWN] button.
Note:
There is the model that is not equipped with
this mode by a version.
Clear loading/ejection error history
:The error history stored in the EEPROM is
cleared.
Read loading and ejection error history
: The error history saved in the system control
is read and displayed.
TOT-xxxx : Total error count.
Total error count
(A figure between 0 and 9999 is
displayed. 10000 or more is also
displayed as 9999.)
Enyyzzzz: Latest three error code.
Detailed error code
Error code
Counter
0nyyzzzz: First five error code
Detailed error code
Error code
Counter
*Exchanging it operate each indication with the
[DISC UP] button and [DISC DOWN] button.
(No.MA308)1-37
Advertisement
