Table of Contents
Advertisement
VIDEONICS FIRESTORE
Dismounting FireWire Disk Drives from Windows
2000, 98SE and ME Computer Systems
Once you have completed working with your disk drive on a Windows 2000,
Windows 98SE or Windows ME computer system, you must first dismount
the drive before unplugging it. To do this, simply click on the Stop Device icon
at the bottom right side of the Windows task bar. See Below:
Once clicked, your computer system will display the following message:
Select the message by clicking on it. Your computer will now dismount the
disk drive and display the following message:
It is now possible to unplug the connected FireWire disk drive from your
computer system.
Mounting FireWire Disk Drives to Macintosh
Computer Systems
Note: Even if your FireWire disk drive was bought for use on a Macintosh, you
MUST first format the drive as a FAT 32 volume on a Windows based computer
system for it to work with FireStore. See page "Creating a Partition on an
Unknown Volume Type" on pages 35-39.
On a Macintosh, start your computer and simply connect your FireWire
disk drive to the computer utilizing a standard 6-pin to 6-pin FireWire cable
Windows Stop Device
Button
PAGE 43
Advertisement
Table of Contents
