Table of Contents
Advertisement
PAGE 26
VIDEONICS FIRESTORE
GPI Default Function
FireStore's GPI interface allows you to trigger several commands using the
GPI port on the rear of the unit. The GPI port is made up of a standard 2.5mm
tip, ring sleeve mini jack that is used for transmitting standard serial com-
mands to the FireStore unit. In default mode, the GPI trigger gives you con-
trol of the following default actions from a simple contact closure.
1. GPI Disabled - No functionality from the GPI port.
2. Pause/Unpause - Selecting this mode allows the user to toggle between
triggering PAUSE and UN-PAUSE of playback or record on FireStore. The
following LCD screen will appear when this option is selected:
3. Index (New File) - Selecting this mode allows the user to create or start a
new file when in record mode. This allows the user to break up continual
record sessions into manageable sequences. The following LCD screen will
appear when this option is selected:
4. Record Snapshot - Selecting this mode allows the user to capture single
frames of video with each sequential press of the contact closure. Each clip
will be saved as a separate file on the hard disk. The following LCD screen
will appear when this option is selected:
Advertisement
Table of Contents
