Assembly - Powermate CX6500E Owner's Manual

TABLE 3. Accessories
Item
Main Unit
Owner's Manual
Liter SAE Oil
Oil Funnel
Wheel (1)
Handle (2)
Hardware Bag
Axle Pin (3)
Foot Spacer (4)
Rubber Feet (5)
M12 x 4mm Flat Washer (6)
M12 x 1.5mm Flat Washer (7)
M8 Flat Washer (8)
M8 x 50 Bolt (9)
M8 x 80 Bolt (10)
M8 Nyloc Nut (11)
Cotter Pin (12)
Handle Grip (13)
Tool Kit
5mm Hex Key
10 x 13mm Wrench
Spark Plug Wrench with Rod
3. Call Powermate Customer Service at 1-
800-445-1805 with the unit model and
serial number for any missing carton con-
tents.
4. Record model, serial number, and date of
purchase on front cover of this manual.
Owner's Manual for Portable Generator

Assembly

Qty.
Consult Manual. Read and understand manual
1
completely before using product. Failure to
completely understand manual and product
1
could result in death or serious injury.
1
Call Powermate Customer Service at 1-800-
1
445-1805 for any assembly issues or con-
cerns. Please have model and serial number
2
available.
2
The following tools are required to install the
accessory kit.
Qty.
• See Table 3: Accessories
2
NOTE: The wheels are not intended for over-
the-road use.
2
See Figure
2
Install wheels as follows:
2
1. Slide axle pin (3) through wheel (1), M12 x
4mm flat washer (6), and frame.
2
2. Install M12 x 1.5mm flat washer (7) and
insert cotter pin (12) through axle (4).
2
Bend tabs (of cotter pins) outward to lock
2
into place.
Install frame foot assembly as follows:
2
1. Slide M8 flat washer (8), rubber foot (5),
4
foot spacer (4) onto M8 x 80 bolt (10).
2
2. Align through holes in frame rail and
secure with M8 nyloc nut (11).
2
Install handle as follows:
1. Slide M8 x 50 bolt (9) through handle
bracket and handle (2). Secure with M8
Qty.
nyloc nut (11).
1
1
1
WARNING
(Tool Kit)
2-7.
(000100a)
7