Download Print this page

Focus Firestore FS-2 User Manual Addendum

Focus firestore fs-2: supplementary guide
Hide thumbs Also See for Firestore FS-2:

Advertisement

Quick Links

User Guide Addendum Rev. B
Version 1.0
This User Guide Addendum is to be used in conjunction with the FS-2 version
1.0 User Guide (MANL-0927-02).
If you require further assistance, in the US and Canada contact FOCUS
Enhancements technical support at:
www.FOCUSinfo.com
E-mail:
support@focusinfo.com
Telephone: 408-370-9963. 8AM – 5PM
Monday to Friday, Pacific time.
(Hint: Mondays tend to be the busiest.)
Fax: 408-866-4859
Local and AV/C Control Mode Changes
There are now two control sub menus under LOCAL and AV/C in the control
mode menu. These are NORMAL, INDEX AT TC and INDEX AT SCENE.
Normal Mode – This is the default setting. When the FS-2 Control mode is set
to LOCAL or AV/C -> NORMAL, recordings are continuous to a single base file
until STOP is triggered.
Index at TC –When the FS-2 Control mode is set to LOCAL or AV/C -> INDEX
AT TC, recordings are continuous until a break in the incoming timecode stream
is detected. At that time, a new file is automatically created. No frames are lost
during the transition to a new clip.
Index at Scene –When the FS-2 Control mode is set to LOCAL or AV/C ->
INDEX AT SCENE, recordings are continuous until a scene break is detected in
the incoming video stream. At that time, a new file is automatically created within
one second of the scene change. No frames are lost during the transition to a
new clip.
MANL- 0972-01

Advertisement

loading

Summary of Contents for Focus Firestore FS-2

  • Page 1 User Guide Addendum Rev. B Version 1.0 This User Guide Addendum is to be used in conjunction with the FS-2 version 1.0 User Guide (MANL-0927-02). If you require further assistance, in the US and Canada contact FOCUS Enhancements technical support at: www.FOCUSinfo.com E-mail: support@focusinfo.com...
  • Page 2 Reference Video Input Changes In the REF VIDEO input menu under SETUP, it is only possible to select either FREE RUN or REF VIDEO as the reference video source. Consult the FS-2 manual on page 2-25 for more information. RS422 Command Set The current supported RS422 command set for FS-2 is as follows: Supported RS422 Commands: Shuttle Fwd...
  • Page 3 Video Adjust Menu Changes Three additional items have been added to the VIDEO ADJUST settings in the SETUP menu. They are BLACK LEVEL, H PHASE (horizontal phase) and SC PHASE (sub carrier phase). While other items in the VIDEO ADJUST menu are for adjusting analog video input levels, BLACK LEVEL, H PHASE and SC PHASE adjustments affect all outputs.