Table of Contents
Advertisement
1 Introduction
1.1
Scope
The scope of this document covers the back to back Graphics Board Display, Master and Slave for
the Beacon Sign Co. Project at Greater Miller Memorial Church.
1.2
Purpose
The purpose of the document is to provide the relevant information to enable the user to operate and
maintain the Display Board correctly.
1.3
System
The Beacon Sign Co. Display system comprises of a back to back Graphics Display Board and the
GRAFIT graphics software package. The Display is 32 pixels high by 96 pixels wide and uses ultra-
bright red LED technology. The housing is fabricated from aluminium extrusion and has a black
powder coat finish.
The Display consists of two units, Master and Slave. At installation, the Power, Serial and Data
cables from Unit 1 are connected to Unit 2.
The Displays are controlled from a host PC using the GRAFIT graphics software. Users can create
and edit both text and graphic messages. The Display Board can show a combination of static and
scrolling messages, normal, large, and/or specialized fonts as well as various ON/OFF effects such
as Flash, Jump, Wipe Sparkle etc.
Warning
Only trained and authorised personnel should do tests and maintenance on this Display
Board System.
DDJ07850001
26-Jan-04
Display User Manual
Page 3
Advertisement
Table of Contents
