Mini COOPER CONVERTIBLE Owner's Manual page 177

Rear luggage rack
General information
Installation only possible with rear luggage rack
preparation.
Rear racks are available as special accessories.
Securing
COOPER
COOPER S
The anchorage points, arrow 1, and the socket,
arrow 2, are located below the covers in the
bumper.
Remove the covers before installing the rear
luggage rack.
Loading
Because rear luggage racks raise the vehicle's
center of gravity when loaded, they have a ma‐
jor effect on vehicle handling and steering re‐
sponse.
Therefore, note the following when loading and
driving:
Things to remember when driving
Online Edition for Part no. 01 40 2 915 102 - X/16
▷ Do not exceed the approved axle load and
the approved gross vehicle weight.
▷ Drive smoothly. Avoid sudden acceleration
and braking maneuvers. Take corners gen‐
tly.
Power consumption
Before starting to drive, check the function of
the rear luggage rack lights.
The rear luggage rack lights must not consume
more than:
▷ Turn signals: 42 watts per side.
▷ Rear lights: 50 watts per side.
▷ Brake lights: 84 watts in total.
▷ Rear fog lights: 42 watts in total.
▷ Backup light: 42 watts in total.
Driving on racetracks
Higher mechanical and thermal loads during
racetrack operation lead to increased wear.
This wear is not covered by the warranty. The
vehicle is not designed for use in motor sports
competition.
DRIVING TIPS
177