Miele DA 2690 Operating And Installation Instructions page 30

Cleaning and care
After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the panel and filters
for cleaning, also clean off any
accessible oil or grease buildup from
the housing. Doing so will prevent a
fire hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
30
 Swivel the panel into the deflector
plate and latch it at the back.
 Swivel it up and forward and press it
into the catch.
Resetting the filter saturation counter
for the grease filters
Once cleaning is complete, the filter
saturation counter must be reset.