Table of Contents
Advertisement
Remote Control Operation
Remote Control Operation
You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan speed, and air
direction. For remote control buttons related to each operation, see the pages at the front of this manual.
Inserting batteries
two 1.5V AAA type batteries
NOTE
• The descriptions in this manual are primarily made
based on the remote control buttons.
• Although Ionizer (
on the remote control display, it is not available on
this model.
• For the multi system Ionizer (
Single user are displayed on the remote control
display, but these functions are not available.
Operation modes
1
You can change the current mode between Auto,
Cool, Dry, Fan, and Heat by pressing the
12 English
) and d'light Cool is displayed
) / d'light Cool /
button.
Controlling temperature
1
You can control the temperature in each mode as
follows:
Mode
Temperature control
Auto/
Cool/
Adjust by 1 °C between 16 °C and 30 °C.
Heat
Dry
Adjust by 1 °C between 18 °C and 30 °C.
Fan
You cannot control the temperature.
NOTE
You can use the Cool, Dry, and Heat modes in the
following conditions:
Mode
Cool
Indoor
16 °C to
temperature
32 °C
Outdoor
-10 °C to
temperature
46 °C
80% or less
Indoor
relative
humidity
humidity
• If the air conditioner operates in a high humidity
environment in the Cool mode for an extended
period of time, condensation may occur.
• If the outdoor temperature drops to -15°C, the
heating capacity may decrease to as much as 60%
to 70% of the specified capacity.
• For more information about outdoor temperature in
the multi system, refer to the manual for the multi
system.
Dry
Heat
18 °C to
27 °C or
less
32 °C
-10 °C to
-15 °C to
24 °C
46 °C
_
_
Advertisement
Table of Contents
